網絡釋義

用法例句

Numerical Control Machining Technology of Hardened Steel Based on HSM;

基于HSM的淬硬鋼數控加工技術

Experimental Study on Dry Turning of Hardened Steel with Ceramic Cutters;

陶瓷刀具干式車削淬硬鋼試驗研究

Study on FE Simulation of Chip Formation and Temperature Field during High Speed Machining Hardened Steel;

高速切削淬硬鋼切屑形成過程及溫度場有限元模擬研究

High speed milling quench steel Cr12MoV is studied.

針對淬硬鋼Cr12MoV進行了高速銑削研究,重點研究了銑削條件對刀具磨損的影響。

The high speed milling Cr12MoV quench steels of 50 HRC and 60 HRC hardness were tested with TiAlN coated tools.

針對硬度分別為50 HRC和60 HRC的Cr12MoV淬硬鋼材料,采用TiAlN涂層刀具進行了高速銑削試驗,重點研究了銑削方式、刀具螺旋角以及潤滑方式等銑削條件對刀具磨損的影響。

surface hardening steel

低淬透性鋼, 淺淬硬鋼, 表面硬化鋼

Study on Cutting Temperature under Ultrasonic Hard Turning 45 Hardened Steel

超聲硬切削45淬硬鋼的切削溫度研究

A Comparison Study on Wet & Dry Cutting Hardened Steel with PCBN Cutting Tools;

PCBN刀具干濕切削淬硬鋼對比研究

Study on interrupted turning of hardened steels with PCBN tools

PCBN刀具斷續車削淬硬鋼的試驗研究

Study on High Speed Cutting Hardened Steel with the Coated Insert (CN35);

硬質合金涂層刀具（CN35）高速車削淬硬鋼的研究

An Experimental Research on the Surface Roughness by Dry Cutting of Hardened Steel SKD11

硬態干式車削淬硬鋼SKD11表面粗糙度試驗研究

Experimental Study on Surface Roughness of HSM Hardened Steel

高速銑削淬硬鋼表面粗糙度的試驗研究

Research on Technology Parameter Optimization of High Speed Milling of Hardened Steel Mould;

淬硬鋼模具高速銑削工藝參數優化研究

Mechanism and Process in High Speed Milling Hardened Steel with Micro-End Mill;

小直徑銑刀高速銑削淬硬鋼機理及工藝研究

Theory and Application of Finishing Turning 45 Hardened Steel;

淬硬鋼精切加工方法的理論與應用研究

Cryogenic Finishing 45 Hardened Steel by CNC Lathe;

數控車床低溫精切45淬硬鋼的切削研究

Study on Microscopic Mechanism of Instability in the Primary Shear Zone during High Speed Machining Hardened Steel

高速切削淬硬鋼主剪切區微觀失穩機理的研究

Study on Experiment of Ultrasonic Vibration Turning 45 Hardened Steel with PCBN Tool

PCBN刀具超聲振動切削45淬硬鋼的試驗研究

Simulation and Cutting Experiment of Hard Cutting under Air Cooling Cutting

風冷條件下淬硬鋼切削過程的仿真與試驗

Study on Cutting Force for Milling Hardened Steel Arc Path with Micro-end Mill

小直徑銑刀銑削淬硬鋼圓弧切削力研究

Can we control the hardness of the steel when it is harden?

我們能夠在鋼淬火時控制它的硬度嗎?

Turning of Hardened AISI 440C Stainless Steel with PCBN Tool

淬硬AISI 440C不銹鋼的車削加工

Influence of overlapping amount on hardness of 9Cr2 steel by laser hardening

搭接量對激光淬火9Cr2鋼硬度的影響