網絡釋義

用法例句

The principle of the spread method of the equivalent circular panicle of special-shaped joint is discussed,and its application is expanded,which can be used for engineering design.

闡述了等效圓臺法的原理，以及此方法在異形接頭展開中的應用擴展。

Study on production technology of profiled PET DTY;

異形滌綸DTY生產工藝探討

Study on the production process of profiled POY fiber;

異形截面POY生產工藝探討

The National Conference Center project has a complicated structure form,varied curvy shape,diversified cylinder columns and special-shaped components.

國家會議中心工程結構形式復雜,立面造型曲面多變,圓柱和異形構件變化多樣,使用常規測量手段難以滿足精度要求。

Though the calculation of a piece of box culvert with a special-shaped structure the paper compares the difference between the traditional calculation method and solid finite element calculation.

通過對一塊異形結構箱涵的計算,比較了傳統計算方法與實體有限元計算的差異;分析了箱涵出入口斷面與道路路線夾角在不同角度下的箱涵上部結構受力情況,給出了相對合理的最小夾角值;對出入口處有斜交的箱涵結構添加?xùn)鸥窳哼M行計算,分析了柵格梁對箱涵結構受力的影響和作用。

In the recent years, steel-reinforced concrete (SRC) structure and special-shaped column structure are being applied more widly than before in buildings in China.

近年來國內型鋼混凝土與異形柱結構的應用日漸廣泛,大量的研究成果已經證明了這兩種結構體系的優點和適用性。

The die swelling of polycarbosilane and the profile degreeof Y-shaped SiC fibers;

聚碳硅烷的擠出脹大與Y型SiC纖維的異形度

The results showed that the profile degree of the nascent PAN fiber was decreased and the sonic velocity and mechanical properties were raised firstly and then dropped while raising the coagu.

結果表明:隨著凝固浴濃度的升高,PAN初生纖維的異形度降低,聲速和力學性能均先升高后降低;隨著凝固浴溫度的升高,PAN初生纖維的異形度增大,聲速和力學性能均降低;隨著噴絲頭拉伸比的增加,PAN初生纖維的異形度增加,聲速和力學性能也都呈上升趨勢,隨著后拉伸的進行,三角形PAN纖維的異形度基本保持不變,其力學性能和聲速均逐漸升高。

The produced fiber had profile degree above 45% and exhibited qualified properties.

2%, 緊張熱定型溫度160℃,可生產成品異形度大于45%,各項性能指標合格的產品。

Study on the trial production technology of "H"shaped profiled fiber;

“H”形異形纖維的試生產工藝探討

Effects of spinning technique and profiles of profiled fibers on their performances;

紡絲工藝及截面形狀對異形纖維性能的影響